Philip,
There was considerable conversation on this very topic last week! This is a copy
of the settings that we use under GRASS4.1. I believe that we were using the
same dipswitch settings with the older Altek driver under GRASS4.0. If you have further questions, please mail to me directly.
Here are the dip switch settings that we are using for a couple of Altek AC31
digitizer controllers:S1 S2 S3 S4
0 1 0 1 0 1 0 1
1 x x x x
2 x x x x
3 x x x x
4 x x x x
5 x x x x
6 x x x x
7 x x x x
8 x x x xWe are using the al30f8_16 digitizer driver in our digcap file.
This setup works for us on a Sun IPC and a Sun Sparc 1+. Good luck!
--
Malcolm D. Williamson - Research Assistant E-mail: malcolm@cast.uark.edu
Center for Advanced Spatial Technologies Telephone: (501) 575-6159
Ozark Rm. 12 Fax: (501) 575-3846
University of Arkansas
Fayetteville, AR 72701