Good afternoon,
I was reading the developer documentation available on:
http://geonetwork-opensource.org/manuals/trunk/developer/development/index.html#debugging-into-eclipse
and I was not able to find a good guide for Geonetwork debugging in
Eclipse. Therefore, I wrote a step-by-step guide that may help other
people. I have attached the document, as it only weights 21kb.
Disclaimer: I am used to develop Desktop applications, so maybe there
are better ways to perform this on Eclipse for a Web application such
as GeoNetwork. Anyway, it works so I think it is useful enough.
Best regards,
César
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
César Martínez Izquierdo
GIS developer
- - - - - - - - - - - - - - - - - - - -
ETC-SIA: http://sia.eionet.europa.eu/
Universitat Autònoma de Barcelona (SPAIN)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
(attachments)
Geonetwork-Eclipse-howto.odt (20.3 KB)
Hallo Cesar,
Take a look at this page:
http://trac.osgeo.org/geonetwork/wiki/ListOfHowTos
If you think your doc is appropriate (and I do), then perhaps that would be a good home for it?
Cheers,
Justin.
-----Original Message-----
From: César Martínez Izquierdo [mailto:cesar.izq@anonymised.com]
Sent: 12 April 2011 15:28
To: geonetwork-devel@lists.sourceforge.net
Subject: [GeoNetwork-devel] Debugging using Eclipse
Good afternoon,
I was reading the developer documentation available on:
http://geonetwork-opensource.org/manuals/trunk/developer/development/index.html#debugging-into-eclipse
and I was not able to find a good guide for Geonetwork debugging in
Eclipse. Therefore, I wrote a step-by-step guide that may help other
people. I have attached the document, as it only weights 21kb.
Disclaimer: I am used to develop Desktop applications, so maybe there
are better ways to perform this on Eclipse for a Web application such
as GeoNetwork. Anyway, it works so I think it is useful enough.
Best regards,
César
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
César Martínez Izquierdo
GIS developer
- - - - - - - - - - - - - - - - - - - -
ETC-SIA: http://sia.eionet.europa.eu/
Universitat Autònoma de Barcelona (SPAIN)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
This email is only intended for the person to whom it is addressed and may contain confidential information. If you have received this email in error, please notify the sender and delete this email which must not be copied, distributed or disclosed to any other person.
Unless stated otherwise, the contents of this email are personal to the writer and do not represent the official view of Ordnance Survey. Nor can any contract be formed on Ordnance Survey's behalf via email. We reserve the right to monitor emails and attachments without prior notice.
Thank you for your cooperation.
Ordnance Survey
Adanac Drive
Southampton SO16 0AS
Tel: 08456 050505
http://www.ordnancesurvey.co.uk
Hi Justin,
I'll transcribe it to wiki format when I get some time. It could be
nice to include the last update date for each document, as I though
those were outdated documents.
Best regards,
César
El día 20 de abril de 2011 13:06, Justin Rowles (C)
<Justin.Rowles@anonymised.com> escribió:
Hallo Cesar,
Take a look at this page:
http://trac.osgeo.org/geonetwork/wiki/ListOfHowTos
If you think your doc is appropriate (and I do), then perhaps that would be a good home for it?
Cheers,
Justin.
-----Original Message-----
From: César Martínez Izquierdo [mailto:cesar.izq@anonymised.com]
Sent: 12 April 2011 15:28
To: geonetwork-devel@lists.sourceforge.net
Subject: [GeoNetwork-devel] Debugging using Eclipse
Good afternoon,
I was reading the developer documentation available on:
http://geonetwork-opensource.org/manuals/trunk/developer/development/index.html#debugging-into-eclipse
and I was not able to find a good guide for Geonetwork debugging in
Eclipse. Therefore, I wrote a step-by-step guide that may help other
people. I have attached the document, as it only weights 21kb.
Disclaimer: I am used to develop Desktop applications, so maybe there
are better ways to perform this on Eclipse for a Web application such
as GeoNetwork. Anyway, it works so I think it is useful enough.
Best regards,
César
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
César Martínez Izquierdo
GIS developer
- - - - - - - - - - - - - - - - - - - -
ETC-SIA: http://sia.eionet.europa.eu/
Universitat Autònoma de Barcelona (SPAIN)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
This email is only intended for the person to whom it is addressed and may contain confidential information. If you have received this email in error, please notify the sender and delete this email which must not be copied, distributed or disclosed to any other person.
Unless stated otherwise, the contents of this email are personal to the writer and do not represent the official view of Ordnance Survey. Nor can any contract be formed on Ordnance Survey's behalf via email. We reserve the right to monitor emails and attachments without prior notice.
Thank you for your cooperation.
Ordnance Survey
Adanac Drive
Southampton SO16 0AS
Tel: 08456 050505
http://www.ordnancesurvey.co.uk
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
César Martínez Izquierdo
GIS developer
- - - - - - - - - - - - - - - - - - - -
ETC-SIA: http://sia.eionet.europa.eu/
Universitat Autònoma de Barcelona (SPAIN)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -