Dear All,
1. Map printing does not work for me. Actually it does not release an error, It seems to start the printing procedure but it is unsuccessful and is unable accomplish it.
2. My Add layer option also does not work. when I search for a layer to add after clicking the plus sign in front of the search result, nothing happens.
Any solution?
Best,
Samin Payro
Center for Development Research (ZEF),
University of Bonn
Hi,
You have to inspect the errors that occur.
Do you have an url of your geonetwork ?
Can you try to inspect logs from web browser devtools ?
On Fri, Jul 7, 2017 at 11:04 AM, Samin Payrosangari <s6sapayr@anonymised.com>
wrote:
Dear All,
1. Map printing does not work for me. Actually it does not release an
error, It seems to start the printing procedure but it is unsuccessful and
is unable accomplish it.
2. My Add layer option also does not work. when I search for a layer to
add after clicking the plus sign in front of the search result, nothing
happens.
Any solution?Best,
Samin Payro
Center for Development Research (ZEF),
University of Bonn------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
GeoNetwork-users mailing list
GeoNetwork-users@lists.sourceforge.net
geonetwork-users List Signup and Options
GeoNetwork OpenSource is maintained at Best Open Source Mac Software 2024
s/geonetwork
--
*camptocamp*
INNOVATIVE SOLUTIONS
BY OPEN SOURCE EXPERTS
*Florent Gravin*
0479444492
Dear Florent,
Our geonetwork is only accessible in our local network, So I do not have a url that you could access.
The errors shown in chrome inspect:
XMLHttpRequest cannot load https://data.zef.de/geoserver_zef/wms?service=WMS&request=GetCapabilities. No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin 'http://10.2.0.37:8080' is therefore not allowed access.
Best,
Samin Payro
Center for Development Research (ZEF),
University of Bonn
On Mon, 10 Jul 2017 10:13:10 +0200
Florent Gravin <florent.gravin@anonymised.com> wrote:
Hi,
You have to inspect the errors that occur.
Do you have an url of your geonetwork ?Can you try to inspect logs from web browser devtools ?
On Fri, Jul 7, 2017 at 11:04 AM, Samin Payrosangari <s6sapayr@anonymised.com>
wrote:Dear All,
1. Map printing does not work for me. Actually it does not release an
error, It seems to start the printing procedure but it is unsuccessful and
is unable accomplish it.
2. My Add layer option also does not work. when I search for a layer to
add after clicking the plus sign in front of the search result, nothing
happens.
Any solution?Best,
Samin Payro
Center for Development Research (ZEF),
University of Bonn------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
GeoNetwork-users mailing list
GeoNetwork-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geonetwork-users
GeoNetwork OpenSource is maintained at http://sourceforge.net/project
s/geonetwork--
*camptocamp*
INNOVATIVE SOLUTIONS
BY OPEN SOURCE EXPERTS*Florent Gravin*
0479444492
And most of the times I don't get any errors, just nothing happens.
On Mon, 10 Jul 2017 15:02:18 +0200
"Samin Payrosangari" <s6sapayr@anonymised.com> wrote:
Dear Florent,
Our geonetwork is only accessible in our local network, So I do not have a url that you could access.
The errors shown in chrome inspect:
XMLHttpRequest cannot load https://data.zef.de/geoserver_zef/wms?service=WMS&request=GetCapabilities. No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin 'http://10.2.0.37:8080' is therefore not allowed access.Best,
Samin Payro
Center for Development Research (ZEF),
University of BonnOn Mon, 10 Jul 2017 10:13:10 +0200
Florent Gravin <florent.gravin@anonymised.com> wrote:Hi,
You have to inspect the errors that occur.
Do you have an url of your geonetwork ?Can you try to inspect logs from web browser devtools ?
On Fri, Jul 7, 2017 at 11:04 AM, Samin Payrosangari <s6sapayr@anonymised.com>
wrote:Dear All,
1. Map printing does not work for me. Actually it does not release an
error, It seems to start the printing procedure but it is unsuccessful and
is unable accomplish it.
2. My Add layer option also does not work. when I search for a layer to
add after clicking the plus sign in front of the search result, nothing
happens.
Any solution?Best,
Samin Payro
Center for Development Research (ZEF),
University of Bonn------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
GeoNetwork-users mailing list
GeoNetwork-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geonetwork-users
GeoNetwork OpenSource is maintained at http://sourceforge.net/project
s/geonetwork--
*camptocamp*
INNOVATIVE SOLUTIONS
BY OPEN SOURCE EXPERTS*Florent Gravin*
0479444492
Hi,
I use version 3.2
On Mon, 10 Jul 2017 15:20:07 +0200
Florent Gravin <florent.gravin@anonymised.com> wrote:
Hi,
On develop branch:
[image: Inline image 1]
wms getCapabilities works fine.
the error in the logs is a network error because there is no CORS header in
your getCapabilities response so geonetwork must use a proxy, then relaunch
the request and it works fine.Print also work.
What version do you use ?
On Mon, Jul 10, 2017 at 3:02 PM, Samin Payrosangari <s6sapayr@anonymised.com>
wrote:Dear Florent,
Our geonetwork is only accessible in our local network, So I do not have
a url that you could access.
The errors shown in chrome inspect:
XMLHttpRequest cannot load https://data.zef.de/geoserver_
zef/wms?service=WMS&request=GetCapabilities. No
'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http://10.2.0.37:8080' is therefore not allowed access.Best,
Samin Payro
Center for Development Research (ZEF),
University of BonnOn Mon, 10 Jul 2017 10:13:10 +0200
Florent Gravin <florent.gravin@anonymised.com> wrote:Hi,
You have to inspect the errors that occur.
Do you have an url of your geonetwork ?Can you try to inspect logs from web browser devtools ?
On Fri, Jul 7, 2017 at 11:04 AM, Samin Payrosangari <s6sapayr@anonymised.com
>
wrote:Dear All,
1. Map printing does not work for me. Actually it does not release an
error, It seems to start the printing procedure but it is unsuccessful
and
is unable accomplish it.
2. My Add layer option also does not work. when I search for a layer to
add after clicking the plus sign in front of the search result, nothing
happens.
Any solution?Best,
Samin Payro
Center for Development Research (ZEF),
University of Bonn------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
GeoNetwork-users mailing list
GeoNetwork-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geonetwork-users
GeoNetwork OpenSource is maintained at http://sourceforge.net/project
s/geonetwork--
*camptocamp*
INNOVATIVE SOLUTIONS
BY OPEN SOURCE EXPERTS*Florent Gravin*
0479444492--
*camptocamp*
INNOVATIVE SOLUTIONS
BY OPEN SOURCE EXPERTS*Florent Gravin*
0479444492