[Geoserver-devel] GeoServer printing extension in download page

Hi,
I see that the printing extension is not listed in the download page (for example here: http://geoserver.org/release/stable/).

What is needed to make it available as a link in the page?
The file is correctly published on sourceforge (http://sourceforge.net/projects/geoserver/files/GeoServer/2.6.2/extensions/geoserver-2.6.2-printing-plugin.zip/download).

Thanks
Mauro

···

==
GeoServer Professional Services from the experts! Visit
http://goo.gl/NWWaa2 for more information.

Dott. Mauro Bartolomeoli
@mauro_bart
Senior Software Engineer

GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272

http://www.geo-solutions.it
http://twitter.com/geosolutions_it


AVVERTENZE AI SENSI DEL D.Lgs. 196/2003

Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003.

The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy’s New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc.

On Wed, 18 Mar 2015 03:41:18 PM Mauro Bartolomeoli wrote:

Hi,
I see that the printing extension is not listed in the download page (for
example here: http://geoserver.org/release/stable/).

What is needed to make it available as a link in the page?
The file is correctly published on sourceforge (
http://sourceforge.net/projects/geoserver/files/GeoServer/2.6.2/extensions/g
eoserver-2.6.2-printing-plugin.zip/download ).

I guess just edit the repo (https://github.com/geoserver/geoserver.github.io).
I don't know how the jekyl output gets to the web pages though.

On a similar note, is there any reason why the current master / 2.8 page
(http://geoserver.org/release/master/) should not have the WPS hazelcast
module shown? I submitted a PR for a little edit on the 2.7 version that
probably should be included before cut-n-paste into master.

I also note that VPF is only shown on master (not 2.6 or 2.7). I don't recall
it as new, and the download link is broken. Did it get relegated/removed and
should be removed from the master download page?

Brad

Thanks for the feedback, VPF was removed - although we had continued to provide the download - it had not actually worked since GeoTools 2.4 :frowning:

If you edit the geoserver.github.io repository the webpages are generated with about a 10 mins delay.

The fun section is here: https://github.com/geoserver/geoserver.github.io/tree/master/_layouts

···

On 18 March 2015 at 13:19, Brad Hards <bradh@anonymised.com> wrote:

On Wed, 18 Mar 2015 03:41:18 PM Mauro Bartolomeoli wrote:

Hi,
I see that the printing extension is not listed in the download page (for
example here: http://geoserver.org/release/stable/).

What is needed to make it available as a link in the page?
The file is correctly published on sourceforge (
http://sourceforge.net/projects/geoserver/files/GeoServer/2.6.2/extensions/g
eoserver-2.6.2-printing-plugin.zip/download ).
I guess just edit the repo (https://github.com/geoserver/geoserver.github.io).
I don’t know how the jekyl output gets to the web pages though.

On a similar note, is there any reason why the current master / 2.8 page
(http://geoserver.org/release/master/) should not have the WPS hazelcast
module shown? I submitted a PR for a little edit on the 2.7 version that
probably should be included before cut-n-paste into master.

I also note that VPF is only shown on master (not 2.6 or 2.7). I don’t recall
it as new, and the download link is broken. Did it get relegated/removed and
should be removed from the master download page?

Brad


Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/


Geoserver-devel mailing list
Geoserver-devel@anonymised.comsts.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-devel


Jody Garnett

On Wed, 18 Mar 2015 02:40:02 PM Jody Garnett wrote:

Thanks for the feedback, VPF was removed - although we had continued to
provide the download - it had not actually worked since GeoTools 2.4 :frowning:

Created a second PR for the VPF removal.

Brad

Thanks, I see there was already a pull request about the wps links (I expected they were intended to be on two lines).

Web site should be updated shortly.

···

On 18 March 2015 at 23:18, Brad Hards <bradh@anonymised.com> wrote:

On Wed, 18 Mar 2015 02:40:02 PM Jody Garnett wrote:

Thanks for the feedback, VPF was removed - although we had continued to
provide the download - it had not actually worked since GeoTools 2.4 :frowning:
Created a second PR for the VPF removal.

Brad


Jody Garnett

I created a pull request (https://github.com/geoserver/geoserver.github.io/pull/18) for the printing plugin.

Thanks
Mauro

···

2015-03-19 7:32 GMT+01:00 Jody Garnett <jody.garnett@anonymised.com…>:

Thanks, I see there was already a pull request about the wps links (I expected they were intended to be on two lines).

Web site should be updated shortly.


Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/


Geoserver-devel mailing list
Geoserver-devel@anonymised.comsts.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-devel


Jody Garnett

On 18 March 2015 at 23:18, Brad Hards <bradh@anonymised.com> wrote:

On Wed, 18 Mar 2015 02:40:02 PM Jody Garnett wrote:

Thanks for the feedback, VPF was removed - although we had continued to
provide the download - it had not actually worked since GeoTools 2.4 :frowning:
Created a second PR for the VPF removal.

Brad