[Geoserver-devel] is DescribeFeatureType (GEOS-4854) still a problem in 2.2-RC3?

I’m trying to carry out a WFS-T insert and update and I’m seeing deadlocks on the describeFeatureType request which look a lot like https://jira.codehaus.org/browse/GEOS-4854 which is marked as fixed in 2.2.x?

Does any one know if this is the same problem (come back from the dead?) or should I keep digging?

Ian


Ian Turton

On Mon, Sep 10, 2012 at 4:29 PM, Ian Turton <ijturton@anonymised.com> wrote:

I’m trying to carry out a WFS-T insert and update and I’m seeing deadlocks on the describeFeatureType request which look a lot like https://jira.codehaus.org/browse/GEOS-4854 which is marked as fixed in 2.2.x?

Does any one know if this is the same problem (come back from the dead?) or should I keep digging?

It was fixed in 2.1.x, but regressed in 2.2.x (unfortunately it’s not possible to test it with our current test harness,
it requires a GeoServer that’s running for good), but then I’ve fixed it again for 2.2-RC3

Cheers
Andrea

==
Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information.

Ing. Andrea Aime
@geowolf
Technical Lead

GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 962313
mob: +39 339 8844549

http://www.geo-solutions.it
http://twitter.com/geosolutions_it


On 10 September 2012 15:41, Andrea Aime <andrea.aime@anonymised.com> wrote:

On Mon, Sep 10, 2012 at 4:29 PM, Ian Turton <ijturton@anonymised.com> wrote:

I’m trying to carry out a WFS-T insert and update and I’m seeing deadlocks on the describeFeatureType request which look a lot like https://jira.codehaus.org/browse/GEOS-4854 which is marked as fixed in 2.2.x?

Does any one know if this is the same problem (come back from the dead?) or should I keep digging?

It was fixed in 2.1.x, but regressed in 2.2.x (unfortunately it’s not possible to test it with our current test harness,
it requires a GeoServer that’s running for good), but then I’ve fixed it again for 2.2-RC3

The mystery deepens - with the latest master-war and a clean tomcat (7.0.30) I can’t make a describeFeatureType (1.0.0 or 1.1.0) at all from the demo page.

I’ve attached the log file but I can’t see anything obvious.

Ian

(attachments)

geoserver.log (67.4 KB)

On 10 September 2012 16:18, Ian Turton <ijturton@anonymised.com> wrote:

On 10 September 2012 15:41, Andrea Aime <andrea.aime@anonymised.com> wrote:

On Mon, Sep 10, 2012 at 4:29 PM, Ian Turton <ijturton@anonymised.com> wrote:

I’m trying to carry out a WFS-T insert and update and I’m seeing deadlocks on the describeFeatureType request which look a lot like https://jira.codehaus.org/browse/GEOS-4854 which is marked as fixed in 2.2.x?

Does any one know if this is the same problem (come back from the dead?) or should I keep digging?

It was fixed in 2.1.x, but regressed in 2.2.x (unfortunately it’s not possible to test it with our current test harness,
it requires a GeoServer that’s running for good), but then I’ve fixed it again for 2.2-RC3

The mystery deepens - with the latest master-war and a clean tomcat (7.0.30) I can’t make a describeFeatureType (1.0.0 or 1.1.0) at all from the demo page.

I’ve attached the log file but I can’t see anything obvious.

However typing the url (http://localhost:8080/geoserver/topp/wfs?service=WFS&version=1.1.0&request=DescribeFeatureType&typeName=topp%3Astates ) does work so I’m at a loss to explain it.

Ian

On Mon, Sep 10, 2012 at 5:18 PM, Ian Turton <ijturton@anonymised.com> wrote:

On 10 September 2012 15:41, Andrea Aime <andrea.aime@anonymised.com> wrote:

On Mon, Sep 10, 2012 at 4:29 PM, Ian Turton <ijturton@anonymised.com> wrote:

I’m trying to carry out a WFS-T insert and update and I’m seeing deadlocks on the describeFeatureType request which look a lot like https://jira.codehaus.org/browse/GEOS-4854 which is marked as fixed in 2.2.x?

Does any one know if this is the same problem (come back from the dead?) or should I keep digging?

It was fixed in 2.1.x, but regressed in 2.2.x (unfortunately it’s not possible to test it with our current test harness,
it requires a GeoServer that’s running for good), but then I’ve fixed it again for 2.2-RC3

The mystery deepens - with the latest master-war and a clean tomcat (7.0.30) I can’t make a describeFeatureType (1.0.0 or 1.1.0) at all from the demo page.

I’ve attached the log file but I can’t see anything obvious.

Hmm… gedit won’t open the log file at all, and “less” displays me something like:

topp:states

^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@
^@^@^@^@^@^@^@^@^@^@^@^@^@

It seems there are some issues with the char encoding…

Cheers
Andrea

==
Our support, Your Success! Visit http://opensdi.geo-solutions.it for more information.

Ing. Andrea Aime
@geowolf
Technical Lead

GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 962313
mob: +39 339 8844549

http://www.geo-solutions.it
http://twitter.com/geosolutions_it