The PMC Meeting is currently scheduled for 17:00 UTC
I believe everyone has switched over from daylight savings time at this point, and a couple people have expressed interest in an earlier meeting time, so do we want to move the meeting to an earlier time?
What works best for everyone?
At the moment 30min earlier would work best for me.
Torben
30 min earlier works fine here too, and open to other suggestions (anything that does not push the meeting later than it is now)
Cheers
Andrea
Regards, Andrea Aime == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it ------------------------------------------------------- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail.
I’d also be able to do 2 hours earlier (So 15:00 UTC), but I wouldn’t prefer it.
Torben
On Tue, Apr 16, 2019 at 10:40 AM Andrea Aime <andrea.aime@anonymised.com> wrote:
30 min earlier works fine here too, and open to other suggestions (anything that does not push the meeting later than it is now)
Cheers
AndreaOn Tue, Apr 16, 2019 at 7:29 PM Torben Barsballe via GeoTools-Devel <geotools-devel@lists.sourceforge.net> wrote:
The PMC Meeting is currently scheduled for 17:00 UTC
I believe everyone has switched over from daylight savings time at this point, and a couple people have expressed interest in an earlier meeting time, so do we want to move the meeting to an earlier time?
What works best for everyone?At the moment 30min earlier would work best for me.
Torben
GeoTools-Devel mailing list
GeoTools-Devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geotools-devel–
Regards, Andrea Aime == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it ------------------------------------------------------- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail.
This topic hasn’t had much in the way of replies since last meeting. Shall we tentatively say 16:30 UTC for tomorrow’s PMC meeting and see how that works out?
Does that work for everyone else?
Cheers,
Torben
On Tue, Apr 16, 2019 at 10:52 AM Torben Barsballe <tbarsballe@anonymised.com> wrote:
I’d also be able to do 2 hours earlier (So 15:00 UTC), but I wouldn’t prefer it.
Torben
On Tue, Apr 16, 2019 at 10:40 AM Andrea Aime <andrea.aime@anonymised.com> wrote:
30 min earlier works fine here too, and open to other suggestions (anything that does not push the meeting later than it is now)
Cheers
AndreaOn Tue, Apr 16, 2019 at 7:29 PM Torben Barsballe via GeoTools-Devel <geotools-devel@lists.sourceforge.net> wrote:
The PMC Meeting is currently scheduled for 17:00 UTC
I believe everyone has switched over from daylight savings time at this point, and a couple people have expressed interest in an earlier meeting time, so do we want to move the meeting to an earlier time?
What works best for everyone?At the moment 30min earlier would work best for me.
Torben
GeoTools-Devel mailing list
GeoTools-Devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geotools-devel–
Regards, Andrea Aime == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it ------------------------------------------------------- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail.
Works for me!
Cheers
Andrea
Il lun 29 apr 2019, 19:56 Torben Barsballe via Geoserver-devel <geoserver-devel@lists.sourceforge.net> ha scritto:
This topic hasn’t had much in the way of replies since last meeting. Shall we tentatively say 16:30 UTC for tomorrow’s PMC meeting and see how that works out?
Does that work for everyone else?
Cheers,
TorbenOn Tue, Apr 16, 2019 at 10:52 AM Torben Barsballe <tbarsballe@anonymised.com> wrote:
I’d also be able to do 2 hours earlier (So 15:00 UTC), but I wouldn’t prefer it.
Torben
On Tue, Apr 16, 2019 at 10:40 AM Andrea Aime <andrea.aime@anonymised.com> wrote:
30 min earlier works fine here too, and open to other suggestions (anything that does not push the meeting later than it is now)
Cheers
AndreaOn Tue, Apr 16, 2019 at 7:29 PM Torben Barsballe via GeoTools-Devel <geotools-devel@lists.sourceforge.net> wrote:
The PMC Meeting is currently scheduled for 17:00 UTC
I believe everyone has switched over from daylight savings time at this point, and a couple people have expressed interest in an earlier meeting time, so do we want to move the meeting to an earlier time?
What works best for everyone?At the moment 30min earlier would work best for me.
Torben
GeoTools-Devel mailing list
GeoTools-Devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geotools-devel–
Regards, Andrea Aime == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it ------------------------------------------------------- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail.
Geoserver-devel mailing list
Geoserver-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-devel
+1
On Mon, 2019-04-29 at 20:18 +0200, Andrea Aime wrote:
Works for me!
Cheers
AndreaIl lun 29 apr 2019, 19:56 Torben Barsballe via Geoserver-devel <geoserver-devel@lists.sourceforge.net> ha scritto:
This topic hasn’t had much in the way of replies since last meeting. Shall we tentatively say 16:30 UTC for tomorrow’s PMC meeting and see how that works out?
Does that work for everyone else?
Cheers,
TorbenOn Tue, Apr 16, 2019 at 10:52 AM Torben Barsballe <tbarsballe@anonymised.com> wrote:
I’d also be able to do 2 hours earlier (So 15:00 UTC), but I wouldn’t prefer it.
Torben
On Tue, Apr 16, 2019 at 10:40 AM Andrea Aime <andrea.aime@anonymised.com.> wrote:
30 min earlier works fine here too, and open to other suggestions (anything that does not push the meeting later than it is now)
Cheers
AndreaOn Tue, Apr 16, 2019 at 7:29 PM Torben Barsballe via GeoTools-Devel <geotools-devel@lists.sourceforge.net> wrote:
The PMC Meeting is currently scheduled for 17:00 UTC
I believe everyone has switched over from daylight savings time at this point, and a couple people have expressed interest in an earlier meeting time, so do we want to move the meeting to an earlier time?
What works best for everyone?At the moment 30min earlier would work best for me.
Torben
GeoTools-Devel mailing list
GeoTools-Devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geotools-devel–
Regards, Andrea Aime == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it ------------------------------------------------------- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail.
Geoserver-devel mailing list
Geoserver-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-devel_______________________________________________ Geoserver-devel mailing list [Geoserver-devel@anonymised.comsts.sourceforge.net](mailto:Geoserver-devel@lists.sourceforge.net) [https://lists.sourceforge.net/lists/listinfo/geoserver-devel](https://lists.sourceforge.net/lists/listinfo/geoserver-devel)
--
Regards,
Nuno Oliveira
==
GeoServer Professional Services from the
experts!
Visit http://goo.gl/it488V for more information.
==
Nuno Miguel Carvalho Oliveira
@nmcoliveira
Software Engineer
GeoSolutions S.A.S.
Via di Montramito 3/A
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272
http://www.geo-solutions.it
http://twitter.com/geosolutions_it
-------------------------------------------------------
Con riferimento alla normativa sul trattamento dei dati
personali (Reg. UE 2016/679 - Regolamento generale sulla
protezione dei dati “GDPR”), si precisa che ogni
circostanza inerente alla presente email (il suo contenuto,
gli eventuali allegati, etc.) è un dato la cui conoscenza
è riservata al/i solo/i destinatario/i indicati dallo
scrivente. Se il messaggio Le è giunto per errore, è
tenuta/o a cancellarlo, ogni altra operazione è illecita.
Le sarei comunque grato se potesse darmene notizia.
This email is intended only for the person or entity to
which it is addressed and may contain information that
is privileged, confidential or otherwise protected from
disclosure. We remind that - as provided by European
Regulation 2016/679 “GDPR” - copying, dissemination or
use of this e-mail or the information herein by anyone
other than the intended recipient is prohibited. If you
have received this email by mistake, please notify
us immediately by telephone or e-mail.
In general that works for me but I’m on site today so I’ll miss this one.
Ian
Ian Turton
Great. As a reminder, the meeting link is https://meet.jit.si/GeoServerMeeting
Torben
On Tue, Apr 30, 2019 at 1:15 AM Ian Turton <ijturton@anonymised.com> wrote:
In general that works for me but I’m on site today so I’ll miss this one.
Ian
On Mon, 29 Apr 2019 at 18:53, Torben Barsballe <tbarsballe@anonymised.com> wrote:
This topic hasn’t had much in the way of replies since last meeting. Shall we tentatively say 16:30 UTC for tomorrow’s PMC meeting and see how that works out?
Does that work for everyone else?
Cheers,
TorbenOn Tue, Apr 16, 2019 at 10:52 AM Torben Barsballe <tbarsballe@anonymised.com> wrote:
I’d also be able to do 2 hours earlier (So 15:00 UTC), but I wouldn’t prefer it.
Torben
On Tue, Apr 16, 2019 at 10:40 AM Andrea Aime <andrea.aime@anonymised.com> wrote:
30 min earlier works fine here too, and open to other suggestions (anything that does not push the meeting later than it is now)
Cheers
AndreaOn Tue, Apr 16, 2019 at 7:29 PM Torben Barsballe via GeoTools-Devel <geotools-devel@lists.sourceforge.net> wrote:
The PMC Meeting is currently scheduled for 17:00 UTC
I believe everyone has switched over from daylight savings time at this point, and a couple people have expressed interest in an earlier meeting time, so do we want to move the meeting to an earlier time?
What works best for everyone?At the moment 30min earlier would work best for me.
Torben
GeoTools-Devel mailing list
GeoTools-Devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geotools-devel–
Regards, Andrea Aime == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it ------------------------------------------------------- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail.
–
Ian Turton
On 30 April 2019 09:23:07 GMT-07:00, Torben Barsballe via GeoTools-Devel geotools-devel@anonymised.comsourceforge.net wrote:
Great. As a reminder, the meeting link is https://meet.jit.si/GeoServerMeeting
Torben
On Tue, Apr 30, 2019 at 1:15 AM Ian Turton <ijturton@anonymised.com> wrote:
In general that works for me but I’m on site today so I’ll miss this one.
Ian
On Mon, 29 Apr 2019 at 18:53, Torben Barsballe <tbarsballe@anonymised.com> wrote:
This topic hasn’t had much in the way of replies since last meeting. Shall we tentatively say 16:30 UTC for tomorrow’s PMC meeting and see how that works out?
Does that work for everyone else?
Cheers,
TorbenOn Tue, Apr 16, 2019 at 10:52 AM Torben Barsballe <tbarsballe@anonymised.com> wrote:
I’d also be able to do 2 hours earlier (So 15:00 UTC), but I wouldn’t prefer it.
Torben
On Tue, Apr 16, 2019 at 10:40 AM Andrea Aime <andrea.aime@anonymised.com> wrote:
30 min earlier works fine here too, and open to other suggestions (anything that does not push the meeting later than it is now)
Cheers
AndreaOn Tue, Apr 16, 2019 at 7:29 PM Torben Barsballe via GeoTools-Devel <geotools-devel@lists.sourceforge.net> wrote:
The PMC Meeting is currently scheduled for 17:00 UTC
I believe everyone has switched over from daylight savings time at this point, and a couple people have expressed interest in an earlier meeting time, so do we want to move the meeting to an earlier time?
What works best for everyone?At the moment 30min earlier would work best for me.
Torben
GeoTools-Devel mailing list
GeoTools-Devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geotools-devel–
Regards, Andrea Aime == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it ------------------------------------------------------- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail.
–
Ian Turton
+0
Sent from my Android device with K-9 Mail. Please excuse my brevity.