Hi all,
I'm using Geoserver 1.7.5 and I have a raster image using the ImageMosaic Plugin.
Everything is working fine, but when I try to generate a LegendGraphic, my geoserver drops out, saying:
"unable to create raster for granule 15"
and then gives an out of memory exception ( I have 1GB reserved for my geoserver according to jconsole ... )
regards,
Stephen
---
This e-mail, any attachments and the information it contains are confidential and meant only for the use of the addressee(s) only. Access to this e-mail by anyone other than the addressee(s) is unauthorized. If you are not the intended addressee (or responsible for delivery of the message to such person), you may not use, copy, distribute or deliver to anyone this message (or any part of its contents) or take any action in reliance on it. In such case, you should destroy this message and notify the sender immediately. If you have received this e-mail in error, please notify us immediately by e-mail or telephone and delete the e-mail from any computer.
All reasonable precautions have been taken to ensure no viruses are present in this e-mail and its attachments. As our company cannot accept responsibility for any loss or damage arising from the use of this e-mail or attachments we recommend that you subject these to your virus checking procedures prior to use.
Ciao Stephen,
few questions:
1> is this one of the mosaics that I have?
2> can you post here a sample request.
3> how is your mosaic configured in geoserver (coverageeditor form)?
Simone.
-------------------------------------------------------
Ing. Simone Giannecchini
GeoSolutions S.A.S.
Owner - Software Engineer
Via Carignoni 51
55041 Camaiore (LU)
Italy
phone: +39 0584983027
fax: +39 0584983027
mob: +39 333 8128928
http://www.geo-solutions.it
http://simboss.blogspot.com/
http://www.linkedin.com/in/simonegiannecchini
-------------------------------------------------------
On Wed, Jun 24, 2009 at 2:10 PM, Kempenaers
Stephen<stephen.kempenaers@anonymised.com> wrote:
Hi all,
I'm using Geoserver 1.7.5 and I have a raster image using the ImageMosaic Plugin.
Everything is working fine, but when I try to generate a LegendGraphic, my geoserver drops out, saying:
"unable to create raster for granule 15"
and then gives an out of memory exception ( I have 1GB reserved for my geoserver according to jconsole ... )
regards,
Stephen
---
This e-mail, any attachments and the information it contains are confidential and meant only for the use of the addressee(s) only. Access to this e-mail by anyone other than the addressee(s) is unauthorized. If you are not the intended addressee (or responsible for delivery of the message to such person), you may not use, copy, distribute or deliver to anyone this message (or any part of its contents) or take any action in reliance on it. In such case, you should destroy this message and notify the sender immediately. If you have received this e-mail in error, please notify us immediately by e-mail or telephone and delete the e-mail from any computer.
All reasonable precautions have been taken to ensure no viruses are present in this e-mail and its attachments. As our company cannot accept responsibility for any loss or damage arising from the use of this e-mail or attachments we recommend that you subject these to your virus checking procedures prior to use.
------------------------------------------------------------------------------
_______________________________________________
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
Fixed on 1.7.x (http://jira.codehaus.org/browse/GEOS-3193), please test.
Simone.
-------------------------------------------------------
Ing. Simone Giannecchini
GeoSolutions S.A.S.
Owner - Software Engineer
Via Carignoni 51
55041 Camaiore (LU)
Italy
phone: +39 0584983027
fax: +39 0584983027
mob: +39 333 8128928
http://www.geo-solutions.it
http://simboss.blogspot.com/
http://www.linkedin.com/in/simonegiannecchini
-------------------------------------------------------
On Wed, Jun 24, 2009 at 11:06 PM, Simone
Giannecchini<simone.giannecchini@anonymised.com> wrote:
Ciao Stephen,
few questions:
1> is this one of the mosaics that I have?
2> can you post here a sample request.
3> how is your mosaic configured in geoserver (coverageeditor form)?
Simone.
-------------------------------------------------------
Ing. Simone Giannecchini
GeoSolutions S.A.S.
Owner - Software Engineer
Via Carignoni 51
55041 Camaiore (LU)
Italy
phone: +39 0584983027
fax: +39 0584983027
mob: +39 333 8128928
http://www.geo-solutions.it
http://simboss.blogspot.com/
http://www.linkedin.com/in/simonegiannecchini
-------------------------------------------------------
On Wed, Jun 24, 2009 at 2:10 PM, Kempenaers
Stephen<stephen.kempenaers@anonymised.com> wrote:
Hi all,
I'm using Geoserver 1.7.5 and I have a raster image using the ImageMosaic Plugin.
Everything is working fine, but when I try to generate a LegendGraphic, my geoserver drops out, saying:
"unable to create raster for granule 15"
and then gives an out of memory exception ( I have 1GB reserved for my geoserver according to jconsole ... )
regards,
Stephen
---
This e-mail, any attachments and the information it contains are confidential and meant only for the use of the addressee(s) only. Access to this e-mail by anyone other than the addressee(s) is unauthorized. If you are not the intended addressee (or responsible for delivery of the message to such person), you may not use, copy, distribute or deliver to anyone this message (or any part of its contents) or take any action in reliance on it. In such case, you should destroy this message and notify the sender immediately. If you have received this e-mail in error, please notify us immediately by e-mail or telephone and delete the e-mail from any computer.
All reasonable precautions have been taken to ensure no viruses are present in this e-mail and its attachments. As our company cannot accept responsibility for any loss or damage arising from the use of this e-mail or attachments we recommend that you subject these to your virus checking procedures prior to use.
------------------------------------------------------------------------------
_______________________________________________
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
Hi all,
Just tested it on the 1.7.x release....
Is working fine now!! thanks
Regards,
Stephen
________________________________________
Van: simboss1@anonymised.com [simboss1@anonymised.com] namens Simone Giannecchini [simone.giannecchini@anonymised.com]
Verzonden: donderdag 25 juni 2009 14:58
Aan: Kempenaers Stephen
CC: geoserver-users@lists.sourceforge.net
Onderwerp: Re: [Geoserver-users] Exception using GetLegendGraphic for raster
Fixed on 1.7.x (http://jira.codehaus.org/browse/GEOS-3193), please test.
Simone.
-------------------------------------------------------
Ing. Simone Giannecchini
GeoSolutions S.A.S.
Owner - Software Engineer
Via Carignoni 51
55041 Camaiore (LU)
Italy
phone: +39 0584983027
fax: +39 0584983027
mob: +39 333 8128928
http://www.geo-solutions.it
http://simboss.blogspot.com/
http://www.linkedin.com/in/simonegiannecchini
-------------------------------------------------------
---
This e-mail, any attachments and the information it contains are confidential and meant only for the use of the addressee(s) only. Access to this e-mail by anyone other than the addressee(s) is unauthorized. If you are not the intended addressee (or responsible for delivery of the message to such person), you may not use, copy, distribute or deliver to anyone this message (or any part of its contents) or take any action in reliance on it. In such case, you should destroy this message and notify the sender immediately. If you have received this e-mail in error, please notify us immediately by e-mail or telephone and delete the e-mail from any computer.
All reasonable precautions have been taken to ensure no viruses are present in this e-mail and its attachments. As our company cannot accept responsibility for any loss or damage arising from the use of this e-mail or attachments we recommend that you subject these to your virus checking procedures prior to use.
Perfect.
Ciao,
Simone.
-------------------------------------------------------
Ing. Simone Giannecchini
GeoSolutions S.A.S.
Owner - Software Engineer
Via Carignoni 51
55041 Camaiore (LU)
Italy
phone: +39 0584983027
fax: +39 0584983027
mob: +39 333 8128928
http://www.geo-solutions.it
http://simboss.blogspot.com/
http://www.linkedin.com/in/simonegiannecchini
-------------------------------------------------------
On Fri, Jun 26, 2009 at 12:06 PM, Kempenaers
Stephen<stephen.kempenaers@anonymised.com> wrote:
Hi all,
Just tested it on the 1.7.x release....
Is working fine now!! thanks
Regards,
Stephen
________________________________________
Van: simboss1@anonymised.com [simboss1@anonymised.com] namens Simone Giannecchini [simone.giannecchini@anonymised.com]
Verzonden: donderdag 25 juni 2009 14:58
Aan: Kempenaers Stephen
CC: geoserver-users@lists.sourceforge.net
Onderwerp: Re: [Geoserver-users] Exception using GetLegendGraphic for raster
Fixed on 1.7.x (http://jira.codehaus.org/browse/GEOS-3193), please test.
Simone.
-------------------------------------------------------
Ing. Simone Giannecchini
GeoSolutions S.A.S.
Owner - Software Engineer
Via Carignoni 51
55041 Camaiore (LU)
Italy
phone: +39 0584983027
fax: +39 0584983027
mob: +39 333 8128928
http://www.geo-solutions.it
http://simboss.blogspot.com/
http://www.linkedin.com/in/simonegiannecchini
-------------------------------------------------------
---
This e-mail, any attachments and the information it contains are confidential and meant only for the use of the addressee(s) only. Access to this e-mail by anyone other than the addressee(s) is unauthorized. If you are not the intended addressee (or responsible for delivery of the message to such person), you may not use, copy, distribute or deliver to anyone this message (or any part of its contents) or take any action in reliance on it. In such case, you should destroy this message and notify the sender immediately. If you have received this e-mail in error, please notify us immediately by e-mail or telephone and delete the e-mail from any computer.
All reasonable precautions have been taken to ensure no viruses are present in this e-mail and its attachments. As our company cannot accept responsibility for any loss or damage arising from the use of this e-mail or attachments we recommend that you subject these to your virus checking procedures prior to use.