Hi
I have been trying to add WMS layers to Mapinfo pro 12
I have added a few overlays such as bus stops and they appear fine, but as soon as I add a base layer such as mastermap or vectormap I get a white screen
Any ideas ?
Mark Ismail
Principal IT Officer
Tel: 0151 443 3021
Knowsley Council ê Westmorland Road ê Huyton ê L36 9GL
Save time – use the IT Service Desk Self Serve Application
I assume you mean ‘a white screen’ in some sort of application that is using your GeoServer.
It may be you need to set the vector layer transparency to true.
Russ
On 27 May 2014, at 16:07, Ismail, Mark <mark.ismail@anonymised.com> wrote:
Hi
I have been trying to add WMS layers to Mapinfo pro 12
I have added a few overlays such as bus stops and they appear fine, but as soon as I add a base layer such as mastermap or vectormap I get a white screen
Any ideas ?
Mark Ismail
Principal IT Officer
Tel: 0151 443 3021
Knowsley Council ê Westmorland Road ê Huyton ê L36 9GLSave time – use the IT Service Desk Self Serve Application
This e-mail and any attachments are confidential. It may contain privileged information and is intended for the named recipient(s) only. It must not be distributed without consent. If you are not one of the intended recipients, please notify the sender immediately and do not disclose, distribute, or retain this email or any part of it and do not take any action based on it.
Unless expressly stated, opinions in this email are those of the individual sender, and not of Knowsley MBC. Legally binding obligations can only be created for, or be entered into on behalf of, Knowsley MBC by duly authorised officers or representatives.
Knowsley MBC excludes any liability whatsoever for any offence caused, any direct or consequential loss arising from the use, or reliance on, this e-mail or its contents. We believe but do not warrant that this e-mail and any attachments are virus free. You must therefore take full responsibility for virus checking and no responsibility is accepted for loss or damage arising from viruses or changes made to this message after it was sent. Knowsley MBC reserves the right to monitor and/or record all e-mail communications through its network in accordance with relevant legislation.
------------------------------------------------------------------------------
The best possible search technologies are now affordable for all companies.
Download your FREE open source Enterprise Search Engine today!
Our experts will assist you in its installation for $59/mo, no commitment.
Test it for FREE on our Cloud platform anytime!
http://pubads.g.doubleclick.net/gampad/clk?id=145328191&iu=/4140/ostg.clktrk_______________________________________________
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
You really need to give us some more clues before we can help. Such as do the layers work in preview? do they work in other clients? is there some difference between the layers that do work and those that don’t? is there a message in the log file? etc
Ian
On 27 May 2014 16:07, Ismail, Mark <mark.ismail@anonymised.com440…> wrote:
Hi
I have been trying to add WMS layers to Mapinfo pro 12
I have added a few overlays such as bus stops and they appear fine, but as soon as I add a base layer such as mastermap or vectormap I get a white screen
Any ideas ?
Mark Ismail
Principal IT Officer
Tel: 0151 443 3021
Knowsley Council ê Westmorland Road ê Huyton ê L36 9GL
Save time – use the IT Service Desk Self Serve Application
This e-mail and any attachments are confidential. It may contain privileged information and is intended for the named recipient(s) only. It must not be distributed without consent. If you are not one of the intended recipients, please notify the sender immediately and do not disclose, distribute, or retain this email or any part of it and do not take any action based on it.
Unless expressly stated, opinions in this email are those of the individual sender, and not of Knowsley MBC. Legally binding obligations can only be created for, or be entered into on behalf of, Knowsley MBC by duly authorised officers or representatives.
Knowsley MBC excludes any liability whatsoever for any offence caused, any direct or consequential loss arising from the use, or reliance on, this e-mail or its contents. We believe but do not warrant that this e-mail and any attachments are virus free. You must therefore take full responsibility for virus checking and no responsibility is accepted for loss or damage arising from viruses or changes made to this message after it was sent. Knowsley MBC reserves the right to monitor and/or record all e-mail communications through its network in accordance with relevant legislation.
The best possible search technologies are now affordable for all companies.
Download your FREE open source Enterprise Search Engine today!
Our experts will assist you in its installation for $59/mo, no commitment.
Test it for FREE on our Cloud platform anytime!
http://pubads.g.doubleclick.net/gampad/clk?id=145328191&iu=/4140/ostg.clktrk
Geoserver-users mailing list
Geoserver-users@anonymised.comsts.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
–
Ian Turton
Layers work fine in openlayers and in preview in geoserver
Its only in mapinfo that they don’t appear, when I say I white screen I mean a new mapper window is blank
Mark Ismail
Principal IT Officer
Tel: 0151 443 3021
Knowsley Council ê Westmorland Road ê Huyton ê L36 9GL
Save time – use the IT Service Desk Self Serve Application
From: Ian Turton [mailto:ijturton@…84…]
Sent: 27 May 2014 16:29
To: Ismail, Mark
Cc: geoserver mailing list (geoserver-users@lists.sourceforge.net)
Subject: Re: [Geoserver-users] WMS base layers dont appear in Mapinfo12
You really need to give us some more clues before we can help. Such as do the layers work in preview? do they work in other clients? is there some difference between the layers that do work and those that don’t? is there a message in the log file? etc
Ian
On 27 May 2014 16:07, Ismail, Mark <mark.ismail@…6440…> wrote:
Hi
I have been trying to add WMS layers to Mapinfo pro 12
I have added a few overlays such as bus stops and they appear fine, but as soon as I add a base layer such as mastermap or vectormap I get a white screen
Any ideas ?
Mark Ismail
Principal IT Officer
Tel: 0151 443 3021
Knowsley Council ê Westmorland Road ê Huyton ê L36 9GL
Save time – use the IT Service Desk Self Serve Application
This e-mail and any attachments are confidential. It may contain privileged information and is intended for the named recipient(s) only. It must not be distributed without consent. If you are not one of the intended recipients, please notify the sender immediately and do not disclose, distribute, or retain this email or any part of it and do not take any action based on it.
Unless expressly stated, opinions in this email are those of the individual sender, and not of Knowsley MBC. Legally binding obligations can only be created for, or be entered into on behalf of, Knowsley MBC by duly authorised officers or representatives.
Knowsley MBC excludes any liability whatsoever for any offence caused, any direct or consequential loss arising from the use, or reliance on, this e-mail or its contents. We believe but do not warrant that this e-mail and any attachments are virus free. You must therefore take full responsibility for virus checking and no responsibility is accepted for loss or damage arising from viruses or changes made to this message after it was sent. Knowsley MBC reserves the right to monitor and/or record all e-mail communications through its network in accordance with relevant legislation.
The best possible search technologies are now affordable for all companies.
Download your FREE open source Enterprise Search Engine today!
Our experts will assist you in its installation for $59/mo, no commitment.
Test it for FREE on our Cloud platform anytime!
http://pubads.g.doubleclick.net/gampad/clk?id=145328191&iu=/4140/ostg.clktrk
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
–
Ian Turton