What's the right way to use r.what to query multiple maps?
--
+-----------------------------------------------------------+
Carlos Henrique Grohmann - Guano
Visiting Researcher at Kingston University London - UK
Geologist M.Sc - Doctorate Student at IGc-USP - Brazil
Linux User #89721 - carlos dot grohmann at gmail dot com
+-----------------------------------------------------------+
_________________
"Good morning, doctors. I have taken the liberty of removing Windows
95 from my hard drive."
--The winning entry in a "What were HAL's first words" contest judged
by 2001: A SPACE ODYSSEY creator Arthur C. Clarke
Carlos "Guâno" Grohmann wrote:
What's the right way to use r.what to query multiple maps?
r.what input=string[,string,...]
Maciek
OK, this is what I was looking for. query multiple maps in map display.
thanks
On 7/3/07, Aldo Clerici <alcl01@unipr.it> wrote:
r.what has a strange performance with the GIS Manager. It doesn't work on
the maps displayed in the Map Display, but only on the map(s)(one or more
separated by commas) defined as Base map in the "Display raster maps" panel.
A.Clerici
-----Messaggio originale-----
Da: grassuser-bounces@grass.itc.it [mailto:grassuser-bounces@grass.itc.it]
Per conto di Carlos "Guâno" Grohmann
Inviato: martedì 3 luglio 2007 17.38
A: grass user
Oggetto: [GRASS-user] query multiple raster
What's the right way to use r.what to query multiple maps?
--
+-----------------------------------------------------------+
Carlos Henrique Grohmann - Guano
Visiting Researcher at Kingston University London - UK
Geologist M.Sc - Doctorate Student at IGc-USP - Brazil
Linux User #89721 - carlos dot grohmann at gmail dot com
+-----------------------------------------------------------+
_________________
"Good morning, doctors. I have taken the liberty of removing Windows
95 from my hard drive."
--The winning entry in a "What were HAL's first words" contest judged
by 2001: A SPACE ODYSSEY creator Arthur C. Clarke
_______________________________________________
grassuser mailing list
grassuser@grass.itc.it
http://grass.itc.it/mailman/listinfo/grassuser
--
+-----------------------------------------------------------+
Carlos Henrique Grohmann - Guano
Visiting Researcher at Kingston University London - UK
Geologist M.Sc - Doctorate Student at IGc-USP - Brazil
Linux User #89721 - carlos dot grohmann at gmail dot com
+-----------------------------------------------------------+
_________________
"Good morning, doctors. I have taken the liberty of removing Windows
95 from my hard drive."
--The winning entry in a "What were HAL's first words" contest judged
by 2001: A SPACE ODYSSEY creator Arthur C. Clarke
r.what has a strange performance with the GIS Manager. It doesn't work on
the maps displayed in the Map Display, but only on the map(s)(one or more
separated by commas) defined as Base map in the "Display raster maps" panel.
This seems an old problem:
http://grass.itc.it/pipermail/grassuser/2007-February/038396.html
A.Clerici
-----Messaggio originale-----
Da: grassuser-bounces@grass.itc.it [mailto:grassuser-bounces@grass.itc.it]
Per conto di Carlos "Guâno" Grohmann
Inviato: martedì 3 luglio 2007 17.38
A: grass user
Oggetto: [GRASS-user] query multiple raster
What's the right way to use r.what to query multiple maps?
--
+-----------------------------------------------------------+
Carlos Henrique Grohmann - Guano
Visiting Researcher at Kingston University London - UK
Geologist M.Sc - Doctorate Student at IGc-USP - Brazil
Linux User #89721 - carlos dot grohmann at gmail dot com
+-----------------------------------------------------------+
_________________
"Good morning, doctors. I have taken the liberty of removing Windows
95 from my hard drive."
--The winning entry in a "What were HAL's first words" contest judged
by 2001: A SPACE ODYSSEY creator Arthur C. Clarke
_______________________________________________
grassuser mailing list
grassuser@grass.itc.it
http://grass.itc.it/mailman/listinfo/grassuser
Query in the TclTk GUI works on the map selected in the layer manager. It
does not work with multiple maps.
Michael
On 7/3/07 10:46 AM, "Aldo Clerici" <alcl01@unipr.it> wrote:
r.what has a strange performance with the GIS Manager. It doesn't work on
the maps displayed in the Map Display, but only on the map(s)(one or more
separated by commas) defined as Base map in the "Display raster maps" panel.
This seems an old problem:
http://grass.itc.it/pipermail/grassuser/2007-February/038396.html
A.Clerici
-----Messaggio originale-----
Da: grassuser-bounces@grass.itc.it [mailto:grassuser-bounces@grass.itc.it]
Per conto di Carlos "Guâno" Grohmann
Inviato: martedì 3 luglio 2007 17.38
A: grass user
Oggetto: [GRASS-user] query multiple raster
What's the right way to use r.what to query multiple maps?
__________________________________________
Michael Barton, Professor of Anthropology
Director of Graduate Studies
School of Human Evolution & Social Change
Center for Social Dynamics & Complexity
Arizona State University
phone: 480-965-6213
fax: 480-965-7671
www: http://www.public.asu.edu/~cmbarton
Michael Barton wrote:
Query in the TclTk GUI works on the map selected in the layer manager. It
does not work with multiple maps.
Michael,
It's a missing feauture, compared to d.what.rast. I often find it
usefull to be able to query multiple layers with one mouse click on an
X monitor.
Do you think it could, someday, be implemented in gis.m? Is it possible
to pass the list of rasters displayed on the canvas to r.what, in the
gis.m query raster tool?
Maciek
It would be nice, but a lot of work. It would take a major rewrite of the
raster layer code because of the way the layer information is gathered.
However, the new wxPython GUI DOES do multi-layer querying automatically. In
fact, it queries both rasters and vectors at the same time.
Michael
On 7/4/07 1:21 AM, "Maciej Sieczka" <tutey@o2.pl> wrote:
Michael Barton wrote:
Query in the TclTk GUI works on the map selected in the layer manager. It
does not work with multiple maps.
Michael,
It's a missing feauture, compared to d.what.rast. I often find it
usefull to be able to query multiple layers with one mouse click on an
X monitor.
Do you think it could, someday, be implemented in gis.m? Is it possible
to pass the list of rasters displayed on the canvas to r.what, in the
gis.m query raster tool?
Maciek
__________________________________________
Michael Barton, Professor of Anthropology
Director of Graduate Studies
School of Human Evolution & Social Change
Center for Social Dynamics & Complexity
Arizona State University
phone: 480-965-6213
fax: 480-965-7671
www: http://www.public.asu.edu/~cmbarton