Please explain...what is this list for then? What happened to the GRASS list? What kind of
queries should we send to this list? Or does this list even exist any more?
Thanks,
Katie Alvin
FOCS/FGI/GIS Specialist
USDA NRCS Bozeman, MT
From owner-grass@isis.cecer.army.mil Mon Feb 23 15:18 GMT 1998
Return-path: <owner-grass@isis.cecer.army.mil>
Received: from isis.cecer.army.mil by mtsofocs.mt.nrcs.usda.gov with ESMTP
(8.7.6/itc-cust.Revision: 1.8 $)
id PAA09183; Mon, 23 Feb 1998 15:18:07 GMT
Received: (from listserv@localhost)
by isis.cecer.army.mil (8.8.5/8.8.5) id EAA28236
for grass-outgoing; Mon, 23 Feb 1998 04:27:07 -0600 (CST)
X-Authentication-Warning: isis.cecer.army.mil: listserv set sender to grass using -f
Received: from pandora.cecer.army.mil (pandora.cecer.army.mil [129.229.103.1])
by isis.cecer.army.mil (8.8.5/8.8.5) with ESMTP id EAA28206
for <grass@cecer.army.mil>; Mon, 23 Feb 1998 04:27:04 -0600 (CST)
Received: from macarena.ctv.es (macarena.ctv.es [195.57.143.21])
by pandora.cecer.army.mil (8.8.5/8.8.4) with ESMTP
id EAA23638 for <grass@cecer.army.mil>; Mon, 23 Feb 1998 04:27:02
-0600 (CST)
Received: from asuncion (ctv4227.ctv.es [194.224.219.227])
by macarena.ctv.es (8.8.7/8.8.7) with ESMTP id LAA00621
for <grass@cecer.army.mil>; Mon, 23 Feb 1998 11:26:24 +0100 (MET)
Message-ID: <199802231026.LAA00621@macarena.ctv.es>
X-Envelope-To: <grass@cecer.army.mil>
From: "Javier Ferrer Polo" <chjoph@ctv.es>
To: <grass@cecer.army.mil>
Subject: RE: Cell count in category value
Date: Mon, 23 Feb 1998 11:26:50 +0100
X-MSMail-Priority: Normal
X-Priority: 3
X-Mailer: Microsoft Internet Mail 4.70.1161
Mime-Version: 1.0
Content-Length: 1168
Content-Type: text/plain; charset=ISO-8859-7
Content-Transfer-Encoding: 7bit
Sender: grass@pandora.cecer.army.mil
Precedence: bulk
Reply-To: grass@cecer.army.mil
Approved: usenet@cecer.army.mil (list -> news gateway)
Status: R----------
De: Filippidis Vangelis <efilippi@for.auth.gr>
A: grassu-list@cecer.army.mil
Asunto: Cell count in category value
Fecha: lunes 16 de febrero de 1998 0:08Hi GRASS community,
I used the r.slope.aspect command to get a slope map
and i get with r.report the cell count for each category of
slope.
However, i want to use the cell count with r.mapcalc.
Is there a way to assign the cell count for each category
of slope, in the category value of the slope map (not by hand!!!)Thank you in advance,
Vangelis.
-------------------------------------------------------------------
------
Filippidis Evangelos
Forester, Ph.D Candidate
Sector of Planning & Natural Resource Development
Department of Forestry & Natural Environment
School of Geotechnical Sciences
Aristotelian University of Thessaloniki
Greece
e-mail : efilippi@for.auth.gr
-------------------------------------------------------------------
------
This E_mail isn't concerning with GRASS and LINUX anymore.
Don't send more messages.
Thanks!