Nicholas:
I an currently writing a driver for a SUMMAGRAPHICS Digitizer for another
client. If you are interested, I can develop one for you also- I offer
GRASS support-
Pat Luther
t 06:06 PM 11/1/96 +0200, you wrote:
Hello,
I have a SUMMA MGIII that can pretend to be a CALCOMP;
Would like to digitize in GRASS but have not been able to
Have tried in SPARC sunos4.1.3, and the sparc solaris2.4
binaries which have CALCOMP drivers and config files (ccf* etc.)
The digitizer works on Microstation/NT with SUMMA drivers;
Any way on the sunos machine v.digit hangs and grass hangs
at the "writing plus file..." pointOn the solaris machine we get "digitizer read error.shall
we continue y/n?" at the digitizer registration point.We have set up the sunbox ports for RS232, eepromed the
ttya-ignore-rts-dtr=true etc. NothingIm not even sure any more as to how the cable should look like
on the sunbox end.For now we are creating dxf file in Microstation and v.in.dxf
into grass, then running v.support. seems to work but we cannot
d.zoom on these vector (binary) files that are output
from the process.
Please help.
tia,
nicolas boretos
Pat Scarbrough Luther "Your dream is the gift of
AEgis Services Corporation your own soul. But if it's
P.O. Box 160 promise is to be fulfilled,
Clinton, TN 37717 you must turn your eyes from
Phone 423.457.8242 the world of men, and dare
FAX 423.457.8620 to fly among the stars....
Internet pluther@usit.net After all, we are born with
wings". Robert Sexton